Large rectangular cross-section tunnel undercrossing urban road by micro pipe jacking and joint assembly structure (MPJ & JAS) method in soft soils.

With the continuous construction of urban traffic roads, more and more new roads are cut off by existing roads to form "dead end roads". There is an urgent need for a trenchless method suitable for urban ultra-shallow overburden to build the undercrossing tunnel. To solve this problem, this paper proposed the micro pipe jacking and joint assembly structure (MPJ & JAS) method, which has the characteristics of shallow burial depth, low cost, short construction time, flexible cross-section setting and high space utilization. The MPJ & JAS method construct a large cross-section tunnel through assembling small cross-section elements, quite different from traditional methods. Therefore, this paper designed a CT-shaped integrated joint, the mechanical performance of which was verified and clarified by tensile test. The bending test and finite element (FE) analysis proved the reliability of MPJ & JAS tunnel structure, and confirmed the structure performances such as the failure models, crack behaviors, load-deflection response and stress-strain distribution. Moreover, the influences of the steel plate thickness, concrete strength and shear connector spacing were determined by the FE analysis. On the basis of test results and reasonable assumptions, a theoretical design method considering the influence of the CT-shaped integrated joint was proposed, which can effectively predict the bending strength of the MPJ & JAS tunnel structure with an error of less than 10%. Finally, in view of the characteristics of the MPJ & JAS method, the suitable micro pipe jacking machine, soil reinforcement measure, hydraulic traction construction technology, high-precision guidance system and concrete construction quality detection method based on the phased array ultrasonic imaging technology were developed, supporting the accurate and efficient construction of the MPJ & JAS tunnel.

A Novel Detection and Assessment Method for Operational Defects of Pipe Jacking Tunnel Based on 3D Longitudinal Deformation Curve: A Case Study.

Adjacent tunnel construction and environmental disturbances can lead to longitudinal deformation in pipe-jacking tunnels. The longitudinal deformation of the tunnel is closely related to the occurrence of joint dislocation, joint opening, and other defects. In view of the difficulty of obtaining 3D longitudinal deformation curves, a method is proposed to obtain 3D longitudinal deformation curves based on a large number of 3D point cloud data with high spatial resolution and large spatial dimensions. Combined with the mechanism of defects occurrence, a theoretical basis for tunnel defects assessment based on tunnel longitudinal deformation is proposed. Taking one pipe jacking tunnel as an example, the longitudinal settlement curve and the 3D longitudinal deformation curve are compared. The correlation between the 3D longitudinal deformation curve and defects such as mud leakage, cracks, and differential deformation is illustrated from the perspective of three indexes: deformation amount, bending deformation, and shearing deformation. The accuracy and reliability of the 3D longitudinal deformation curve in tunnel defects detection and assessment are verified.

Three-Level Distributed Real-Time Monitoring of Construction near Underground Infrastructure Using a Combined Intelligent Method.

With the rapid development of underground infrastructure and the uncertainty of its location, the possibility of damage due to nearby construction has increased. Thus, for the early warning of dangerous construction behaviors around underground facilities, this paper proposes a novel real-time distributed monitoring method with three levels, comprised of the terminal node, relay node, and server. Corresponding to these three monitoring levels, a vibration-based intelligent solution for recognizing the construction source is presented and compared with the traditional method. First, the blind source separation method was used to separate collected signals into a limited number of monitoring object sources; this helped to minimize the number of required classification categories and reduce the recognition uncertainty caused by signal mixing. Then, the mutual information (MI) method was used to select suitable vibration features, which were used as the input matrix for the resulting intelligent recognition. Finally, the construction behaviors were identified at the server based on returned features. Guided by this method, a sample dataset including pile-driving, train-operation, and environment-vibration signals was constructed and combined with a multi-layer perceptron (MLP) and a long short-term memory (LSTM) network. The effects of blind source separation and the MI method are discussed in depth in this paper.

An Unsupervised Tunnel Damage Identification Method Based on Convolutional Variational Auto-Encoder and Wavelet Packet Analysis.

Finding a low-cost and highly efficient method for identifying subway tunnel damage can greatly reduce catastrophic accidents. At present, tunnel health monitoring is mainly based on the observation of apparent diseases and vibration monitoring, which is combined with a manual inspection to perceive the tunnel health status. However, these methods have disadvantages such as high cost, short working time, and low identification efficiency. Thus, in this study, a tunnel damage identification algorithm based on the vibration response of in-service train and WPE-CVAE is proposed, which can automatically identify tunnel damage and give the damage location. The method is an unsupervised novelty detection that requires only sufficient normal data on healthy structure for training. This study introduces the theory and implementation process of this method in detail. Through laboratory model tests, the damage of the void behind the tunnel wall is designed to verify the performance of the algorithm. In the test case, the proposed method achieves the damage identification performance with a 96.25% recall rate, 86.75% hit rate, and 91.5% accuracy. Furthermore, compared with the other unsupervised methods, the method performance and noise immunity are better than others, so it has a certain practical value.

Theoretical, Numerical, and Experimental Study on the Identification of Subway Tunnel Structural Damage Based on the Moving Train Dynamic Response.

As an important part of urban rail transit, subway tunnels play an important role in alleviating traffic pressure in mega-cities. Identifying and locating damage to the tunnel structure as early as possible has important practical significance for maintaining the long-term safe operation of subway tunnels. Summarizing the current status and shortcomings of the structural health monitoring of subway tunnels, a very economical and effective monitoring program is proposed, which is to use the train vibration response to identify and locate the damage of the tunnel structure. Firstly, the control equation of vehicle-tunnel coupling vibration is established and its analytical solution is given as the theoretical basis of this paper. Then, a damage index based on the cumulative sum of wavelet packet energy change rate (TDISC) is proposed, and its process algorithm is given. Through the joint simulation of VI-Rail and ANSYS, a refined 3D train-tunnel coupled vibration model is established. In this model, different combined conditions of single damage and double damage verify the validity of the damage index. The effectiveness of this damage index was further verified through model tests, and the influence of vehicle speed and load on the algorithm was discussed. Numerical simulation and experimental results show that the TDISC can effectively locate the damage of the tunnel structure and has good robustness.

Predicting Slurry Pressure Balance with a Long Short-Term Memory Recurrent Neural Network in Difficult Ground Condition.

The safety of tunneling with shield tunnel boring machines largely depends on the tunnel face pressure, which is currently decided by human operators empirically. Face pressure control is vulnerable to human misjudgment and human errors can cause severe consequences, especially in difficult ground conditions. From a practical perspective, it is therefore beneficial to have a model capable of predicting the tunnel face pressure given operation and the changing geology. In this paper, we propose such a model based on deep learning. More specifically, a long short-term memory (LSTM) recurrent neural network is employed for tunnel face pressure prediction. To correlate with PLC data, linear interpolation is employed to transform the borehole geological data into sequential geological data according to the shield machine position. The slurry pressure in the excavation chamber (SPE) is taken as the output in the case study of Nanning Metro, which is confronted with the clogging problem due to the mixed ground of mudstone and round gravel. The LSTM-based SPE prediction model achieved an overall MAPE and RMSE of 3.83% and 10.3 kPa, respectively, in mudstone rich ground conditions. Factors that influence the model, including different kinds and length of input data and comparison with the traditional machine learning-based model, are also discussed.